كشّاف فرينل
ECLFR2KTW
421x537x456mm
Size
1 / 2 / 5 - 1 / 5 - 2 / 7 - 1 / 7 - 2 / 8 / 9 / 12 / 13 / 16 / 19 / 21ch
DMX Channels
Neutrik powerCON TRUE1 IN/OUT connectors
Power Consumption
17,2kg
Weight
Experience the
ECLFR2KTW
Light Show
| Source | 500W 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime) |
|---|---|
| Source CCT | 2.800 K - 10.000K |
| Luminous flux | (17°) 10'100 lm - (76°) 13'400 @Full |
| Lux | (17°) 3'864 lx - (76°) 710lx @5 m full |
| CRI | 89 @3.200 K; 90,7 @5.600 K |
| R9 | 80 @3.200 K; 85,4 @5.600 K |
| TLCI | 87 @5.600 K |
| TM30 Rf | 89,4 @3.200 K; 86,2 @5.600 K |
| TM30 Rg | 101,6 @3.200 K; 102,1 @5.600 K |
| Source life expectancy | > 50.000 h |
| Zoom range | 17° - 76° manual |
| Lens diameter | 250mm |
| Lens type | fresnel zoom lens |
| Other | spigot, barndoor and gel frame included |
| Colour mixing | 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime) |
| CCT | CCT control, + / - green correction, tungsten emulation |
| White presets | 2.800 K - 10.000K |
| Colour wheel | virtual colour wheel with macros |
| Macros | several pre-built macros with adjustable speed |
| Static mode | selection of static colour |
| Manual mode | manual adjustment of intensity, CT, colour correction from knob |
| Auto mode | built-in programs with execution speed adjustment |
| Special features | linear crossfade channel from any white to any colour; virtual CTO on colours |
| Supported Protocols | DMX512, RDM, rotatory knob |
| DMX channels | 1 / 2 / 5 - 1 / 5 - 2 / 7 - 1 / 7 - 2 / 8 / 9 / 12 / 13 / 16 / 19 / 21ch |
| RDM | for remote addressing and parameter configuration |
| Display | Graphic User Interface |
| Master/Slave | for synchronised operation of more units linked in a chain |
| Other | 16bit control of dimmer and colour |
| Dimmer | linear 0 - 100% electronic dimmer |
| Dimmer curves | 4 selectable dimming modes available |
| Strobe / shutter | 1 - 30 Hz, electronic |
| Selectable PWM | 600 to 25000 Hz (selectable steps) |
| Firmware upgrade | via DMX with UPBOXPRO/UPBOX1 (not included) |
| Power connection | Neutrik powerCON TRUE1 IN/OUT connectors |
| Signal connection | Amphenol XLR 5p IN/OUT connectors |
| Mains power supply | 100-240V - 50/60Hz |
| Max power consumption (230V) | 400W |
| Output (at 230V) | 5 units on a single power line |
| Power factor | >0,93 |
| IP rating | IP20 |
| Cooling | heat pipe with low-noise fan |
| Housing | Sturdy die-cast aluminium body |
| Finish | black (RAL 9004) or white (RAL 9010) |
| Operating temperature | Ta -10 to +45 °C (+14 to +113 °F) |
| Dimensions (WxHxD) | 421x537x456mm |
| Dimensions with PO system (WxHxD) | 401x691x456mm |
| Weight | 17,2kg |
| Weight with PO system | 18kg |
| Suspension and fixing | bracket for hanging and positioning |
| Hardware on-board | filter frame, 8 doors barndoor, spigot |
| Compliance | CE, UKCA, RCM |
No downloads available yet.
Explore Similar
Products
Ready to Transform Your Space?
التوصيل
للطلبات التي تتجاوز 1,000 درهم
الضمان
2 years
دفع آمن
معاملات مشفرة وآمنة
دعم متخصص
دعم ما قبل وما بعد البيع
EclFresnel 2KTW is an advanced LED replacement of traditional 2.000W Fresnel lamps. Offering 6 colour mixing, delivering high precision reproduction of the white spectrum from 2.800 K to 10.000 K with high CRI and extensive colour reproduction. The optical system harnesses the power of a 500W custom LED with 6 colours to create an even projection, beautiful colours and precise whites, with the option to apply +/- green and magenta correction to match other light sources. Featuring HDL dimming and tuning from 2.800 K to 10.000 K, the EclFresnel 2KTW delivers both on performance and quality of output that is demanded from this level of light.
EclFresnel 2KTW is an advanced LED replacement of traditional 2.000W Fresnel lamps. Offering 6 colour mixing, delivering high precision reproduction of the white spectrum from 2.800 K to 10.000 K with high CRI and extensive colour reproduction. The optical system harnesses the power of a 500W custom LED with 6 colours to create an even projection, beautiful colours and precise whites, with the option to apply +/- green and magenta correction to match other light sources. Featuring HDL dimming and tuning from 2.800 K to 10.000 K, the EclFresnel 2KTW delivers both on performance and quality of output that is demanded from this level of light.
Features:Tunable white 2.800 K - 10.000 K with high CRI and extensive colour mixing
+/- green and magenta white tuning
Truly silent operation making it perfect for studio and stage use
LIGHT SOURCE
- Source:500W6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)
- Source CCT:2.800 K - 10.000K
- Luminous flux:(17°) 10'100 lm - (76°) 13'400@Full
- Lux:(17°) 3'864 lx - (76°) 710lx@5 m full
- CRI:89 @3.200 K; 90,7 @5.600 K
- R9:80 @3.200 K; 85,4 @5.600 K
- TLCI:87 @5.600 K
- TM30 Rf:89,4 @3.200 K; 86,2 @5.600 K
- TM30 Rg:101,6 @3.200 K; 102,1 @5.600 K
- Source life expectancy:> 50.000 h
OPTICS
- Zoom range:17° - 76°manual
- Lens diameter:250mm
- Lens type:fresnel zoom lens
- Other:spigot, barndoor and gel frame included
COLOUR SYSTEM
- Colour mixing:6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)
- CCT:CCT control, + / - green correction, tungsten emulation
- White presets:2.800 K - 10.000K
- Colour wheel:virtual colour wheel with macros
- Macros:several pre-built macros with adjustable speed
DYNAMIC EFFECTS
- Static mode:selection of static colour
- Manual mode:manual adjustment of intensity, CT, colour correction from knob
- Auto mode:built-in programs with execution speed adjustment
- Special features:linear crossfade channel from any white to any colour; virtual CTO on colours
CONTROL
- Supported Protocols:DMX512, RDM, rotatory knob
- DMX channels:1 / 2 / 5 - 1 / 5 - 2 / 7 - 1 / 7 - 2 / 8 / 9 / 12 / 13 / 16 / 19 / 21ch
- RDM:for remote addressing and parameter configuration
- Display:Graphic User Interface
- Master/Slave:for synchronised operation of more units linked in a chain
- Other:16bit control of dimmer and colour
ELECTRONICS
- Dimmer:linear 0 - 100% electronic dimmer
- Dimmer curves:4selectable dimming modes available
- Strobe / shutter:1 - 30Hz, electronic
- Selectable PWM:600 to 25000 Hz (selectable steps)
- Firmware upgrade:via DMX with UPBOXPRO/UPBOX1 (not included)
CONNECTIONS
- Power connection:Neutrik powerCON TRUE1 IN/OUT connectors
- Signal connection:Amphenol XLR 5p IN/OUT connectors
ELECTRICAL
- Mains power supply:100-240V - 50/60Hz
- Max power consumption (230V):400W
- Output (at 230V):5units on a single power line
- Power factor:>0,93
PHYSICAL
- IP rating:IP20
- Cooling:heat pipe with low-noise fan
- Housing:Sturdy die-cast aluminium body
- Finish:black (RAL 9004) or white (RAL 9010)
- Operating temperature:Ta-10 to +45 °C (+14 to +113 °F)
- Dimensions (WxHxD):421x537x456mm
- Dimensions with PO system (WxHxD):401x691x456mm
- Weight:17,2kg
- Weight with PO system:18kg
INSTALLATION
- Suspension and fixing:bracket for hanging and positioning
- Hardware on-board:filter frame, 8 doors barndoor, spigot
CERTIFICATIONS / REPORTS
- Compliance:CE, UKCA, RCM
لا توجد تقييمات بعد.
LED Fresnel FC and Tunable White with colour correction, to replace 2.000W lamp
EclFresnel 2KTW is an advanced LED replacement of traditional 2.000W Fresnel lamps. Offering 6 colour mixing, delivering high precision reproduction of the white spectrum from 2.800 K to 10.000 K with high CRI and extensive colour reproduction. The optical system harnesses the power of a 500W custom LED with 6 colours to create an even projection, beautiful colours and precise whites, with the option to apply +/- green and magenta correction to match other light sources. Featuring HD dimming and tuning from 2.800 K to 10.000 K, the EclFresnel 2KTW delivers both on performance and quality of output that is demanded from this level of light.
Main features:
- Tunable white 2.800 K - 10.000 K with high CRI and extensive colour mixing
- +/- green and magenta white tuning
- Truly silent operation making it perfect for studio and stage use