تخطي للذهاب إلى المحتوى
  1. Product
  2. الإضاءة
  3. tarm 3
tarm 3
tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3 tarm 3
الإضاءة

tarm 3

Experience the
tarm 3
Light Show

No specifications available yet.

No downloads available yet.

tarm 3

Explore Similar
Products

Ready to Transform Your Space?

رمز المنتج: NA0172
الفئة: الإضاءة , ليزر , ليزر
العلامة التجارية: tarm
التوصيل للطلبات التي تتجاوز 1,000 درهم
الضمان 1 years
دفع آمن معاملات مشفرة وآمنة
دعم متخصص دعم ما قبل وما بعد البيع

The tarm 3 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 3'000 mW after optics. The tarm 3 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX and automatic mode. The tarm 3 comes with integrated ShowNET network interface and free laser show software. Details in the box below. The benefits include:

  • 3'000 mW guaranteed output power
  • a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than <0.6 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and good color fading
  • the tarm 3 impresses with very bright 637 nm single mode red
The tarm 3 laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than <0.6 mrad. It is equipped with a bright red (1'000 mW / 637 nm), a green (900 mW / 520 nm), and a blue (1'700 mW / 450 nm) diode laser source. The scanners are very fast with 45kpps @ 8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications. Optionally as upgrade available: CT-6210 scanners with 60 kpps@8° ILDA and a max. scan angle of 60°. This show laser light has a switchable scan safety. The housing of the tarm 3 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum. The mounting bracket allows for hanging and for upright mounting of the laser system. The tarm 3 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.
+ Integrated ShowNET incl. free laser show software The tarm 3 features an integrated ShowNET network interface with free laser control software included! Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 3 for free. The Showcontroller software is supported as well and can be purchased additionally. The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played from an integrated SD card (included in delivery) – even in stand-alone mode! There are two different DMX modes: (1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system. (2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show. The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

لا توجد تقييمات بعد.

تصفح الفئات ذات الصلة

المزيد من الفئات ضمن الإضاءة

إضاءة الترفيه
إضاءة الترفيه
إضاءة معمارية
إضاءة معمارية
إضاءة المسرح
إضاءة المسرح
المسرح والسينما والاستوديو
المسرح والسينما والاستوديو
المؤثرات الخاصة
المؤثرات الخاصة
التحكم في الإضاءة
التحكم في الإضاءة
الإلكترونيات
توزيع الإشارة

The tarm 3 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 3'000 mW after optics. The tarm 3 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX and automatic mode. The tarm 3 comes with integrated ShowNET network interface and free laser show software. Details in the box below. The benefits include:

  • 3'000 mW guaranteed output power
  • a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than <0.6 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and good color fading
  • the tarm 3 impresses with very bright 637 nm single mode red
The tarm 3 laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than <0.6 mrad. It is equipped with a bright red (1'000 mW / 637 nm), a green (900 mW / 520 nm), and a blue (1'700 mW / 450 nm) diode laser source. The scanners are very fast with 45kpps @ 8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications. Optionally as upgrade available: CT-6210 scanners with 60 kpps@8° ILDA and a max. scan angle of 60°. This show laser light has a switchable scan safety. The housing of the tarm 3 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum. The mounting bracket allows for hanging and for upright mounting of the laser system. The tarm 3 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.
+ Integrated ShowNET incl. free laser show software The tarm 3 features an integrated ShowNET network interface with free laser control software included! Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 3 for free. The Showcontroller software is supported as well and can be purchased additionally. The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played from an integrated SD card (included in delivery) – even in stand-alone mode! There are two different DMX modes: (1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system. (2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show. The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.